lake track bridge ideas

[branmas]

i seriously need ideas for my lake track, or at least a link to a good lake bridge that i can get or how to build one.

the lego fan

[ZeldaTheSwordsman]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

[branmas]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

[AJWPRODUCTIONS]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

you coud use woodland scenics water, then the bachmann engines wouldn't have that problem yours, AJWPRODUCTIONS and OzzyWoodStudios

[branmas]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

you coud use woodland scenics water, then the bachmann engines wouldn't have that problem yours, AJWPRODUCTIONS and OzzyWoodStudios

thank you so much! with that idea i could make engines crash in the lake!

the lego fan

[AJWPRODUCTIONS]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

you coud use woodland scenics water, then the bachmann engines wouldn't have that problem yours, AJWPRODUCTIONS and OzzyWoodStudios

thank you so much! with that idea i could make engines crash in the lake!

the lego fan

your welcome

[branmas]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

you coud use woodland scenics water, then the bachmann engines wouldn't have that problem yours, AJWPRODUCTIONS and OzzyWoodStudios

thank you so much! with that idea i could make engines crash in the lake!

the lego fan

your welcome

i have a good plan. though could you post a link to somewhere i could get it, like ebay?

the lego fan

[AJWPRODUCTIONS]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

you coud use woodland scenics water, then the bachmann engines wouldn't have that problem yours, AJWPRODUCTIONS and OzzyWoodStudios

thank you so much! with that idea i could make engines crash in the lake!

the lego fan

your welcome

i have a good plan. though could you post a link to somewhere i could get it, like ebay?

the lego fan

hmm you should be able to find some at a good local modeling store but if you want a link I'll post one

[branmas]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

you coud use woodland scenics water, then the bachmann engines wouldn't have that problem yours, AJWPRODUCTIONS and OzzyWoodStudios

thank you so much! with that idea i could make engines crash in the lake!

the lego fan

your welcome

i have a good plan. though could you post a link to somewhere i could get it, like ebay?

the lego fan

hmm you should be able to find some at a good local modeling store but if you want a link I'll post one

i have no idea where to go for a hobby shop so link please.

the lego fan

[AJWPRODUCTIONS]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

you coud use woodland scenics water, then the bachmann engines wouldn't have that problem yours, AJWPRODUCTIONS and OzzyWoodStudios

thank you so much! with that idea i could make engines crash in the lake!

the lego fan

your welcome

i have a good plan. though could you post a link to somewhere i could get it, like ebay?

the lego fan

hmm you should be able to find some at a good local modeling store but if you want a link I'll post one

i have no idea where to go for a hobby shop so link please.

the lego fan

Heres everything they have for sale on ebay:
http://shop.ebay.com.au/?_from=R40&_trksid=p3907.m570.l1311&_nkw=woodland+scenics&_sacat=See-All-Categories

[ZeldaTheSwordsman]

You should also try looking up the addresses of actual bricks-and-mortar hobby shops in your area. Check the Yellow Pages.

[branmas]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

you coud use woodland scenics water, then the bachmann engines wouldn't have that problem yours, AJWPRODUCTIONS and OzzyWoodStudios

thank you so much! with that idea i could make engines crash in the lake!

the lego fan

your welcome

i have a good plan. though could you post a link to somewhere i could get it, like ebay?

the lego fan

hmm you should be able to find some at a good local modeling store but if you want a link I'll post one

i have no idea where to go for a hobby shop so link please.

the lego fan

Heres everything they have for sale on ebay:
http://shop.ebay.com.au/?_from=R40&_trksid=p3907.m570.l1311&_nkw=woodland+scenics&_sacat=See-All-Categories

thanks for the link.

You should also try looking up the addresses of actual bricks-and-mortar hobby shops in your area. Check the Yellow Pages.

thanks for the idea, but the link will be fine.

[AJWPRODUCTIONS]

Tomy bridges might work, depending. If you want it elevated over the water, I'd recommend picking up some cheap Atlas plate girder bridge kits or a downloadable card kit of a plate girder, deck girder, or arch bridge. If it doesn't need to be elevated, just regular track with extra ballast stuck on the bed to simulate piled stones works. With your setup, will tall ships need to get through? If so, look for a drawbridge kit or make your own drawbridge if you feel up to doing the track wiring involved.

well i do want it elevated but not over the water because there is no water because mom wont allow water near bachmann so i wanna also create a way to make it look like there is water but when there isn't, oh, and i want it to be as long as two normal straights. thanks for the ideas but anymore?

you coud use woodland scenics water, then the bachmann engines wouldn't have that problem yours, AJWPRODUCTIONS and OzzyWoodStudios

thank you so much! with that idea i could make engines crash in the lake!

the lego fan

your welcome

i have a good plan. though could you post a link to somewhere i could get it, like ebay?

the lego fan

hmm you should be able to find some at a good local modeling store but if you want a link I'll post one

i have no idea where to go for a hobby shop so link please.

the lego fan

Heres everything they have for sale on ebay:
http://shop.ebay.com.au/?_from=R40&_trksid=p3907.m570.l1311&_nkw=woodland+scenics&_sacat=See-All-Categories

thanks for the link.

You should also try looking up the addresses of actual bricks-and-mortar hobby shops in your area. Check the Yellow Pages.

thanks for the idea, but the link will be fine.

your welcome