How do I program a Bachmann DCC turnout to a NCE Power Cab?

Started by keeper5012, March 25, 2011, 09:29:46 PM

Previous topic - Next topic

keeper5012

I need some instruction on how to program or find out how to program my Bachmann DCC turnout to a NCE Power Cab. The NCE and Bachmann instructions both aren't clear or very helpful and I have been messing with it for a while.

hawaiiho

I think that was the "Yardmaster" who posted that comment.

And yes, that is an excellent group and extremely helpful.

whizamit

I had asked the same question here a couple months ago but either the moderator deleted the comments or there were lost messages in this forum.

Anyway i finally figured out how to program Bachmann turnouts with NCE power cab
1. Hook up NCE powercab to the track and attach the turnout
2. Press the programming button on the turnout till the turnout clicks
3. On the powercab
a. Press 'select accesory'
b. Press the number you want to allocate for the turnout and press enter
c. Press 1 or 2
4. The turnout should click twice and get programmed

HTH

NWsteam

QuoteSince March 2009, I delete all my replies, some soon than others. I have deleted hundreds of my posts made before March 2009.

Just curious, why do you do this?