Need info on above decoder

Dear Stan,
The decoder is built into the circuit board. It is dual mode, so the loco will run on analog power.
Have fun!
the Bach-man

Thanks for the info

My problem is that decoder pro is not seeing the decorder to program it. Any ideas.

Thanks Stan

Quote from: StanW on April 16, 2008, 02:05:41 PM
Thanks for the info

My problem is that decoder pro is not seeing the decorder to program it. Any ideas.

Thanks Stan

Using Decoder Pro with a Digitrax Zephyr?
Then a workaround is required to program a non-sound Bachmann decoder using a Digitrax Zephyr.

Workaround ---  Place a 1000 Ohm resistor across the programming track. Remove the resistor after you finish programming the Bachmann decoder.